Mahogany vs Rosewood vs Maple: How Acoustic Guitar Back and Side Woods Shape Your Recording
When I record an acoustic guitar at my Chicago recording studio, the back and side wood is the first thing I look at, because that’s where the low end comes from. Mahogany means midtones. Rosewood means bass. Maple means brightness and percussion. Before I opened this studio, I spent years working for an acoustic guitar manufacturer. Knowing which wood family walks in the door, and which specific wood inside it, changes how I think about the low end before the first mic ever goes up.
This is part 1 of a three-part series on acoustic guitar tonewoods. Part 2 covers top woods, and part 3 covers how tops and backs work together.
Mahogany and Sapele: The Midtone Woods
Always think midtones when you see mahogany. These days you’ll see more African sapele used for back and sides in its place. Sapele has a tighter, speckled grain, but it’s the same family and sits in the same tonal territory. If your guitar is mahogany or sapele, the body of its sound is going to live in the midrange.
Rosewood: The Bass Wood
Always think bass when you see rosewood. Rosewood covers a lot of ground, especially in how it ages, and there’s a clear pecking order. Brazilian rosewood is the most coveted, then Madagascar, then East Indian. Each one sounds different, but they’re all bass woods at their core. That low end is the reason people love rosewood, and it’s also what I watch most closely. Paired with a spruce top, rosewood sounds huge, and it takes more care in the mix to keep the low end from taking over.
Maple and Koa: The Percussive Woods
Always think percussion when you see maple. It’s super bright, and it’s less about tone and more about capturing the percussive side of the guitar. Koa falls in the same territory, with basically the same character as maple. The difference is aging. Koa gets a bit warmer over the years, while maple doesn’t really change its sound over the course of its life.
Back and Side Woods at a Glance
- Mahogany and sapele: midtones
- Rosewood (Brazilian, Madagascar, East Indian): bass
- Maple: bright and percussive, sound stays the same as it ages
- Koa: bright and percussive, warms up a bit with age
How I Record Acoustic Guitar at My Chicago Recording Studio
My main acoustic setup is a stereo pair of Neumann KM184 small-diaphragm condensers. Each mic runs into its own Neve 1073 channel, then into two Warm Audio WA76 compressors, stereo linked. The 1073 gives me four bands of EQ, so the low end gets shaped at the source, before the guitar ever reaches the DAW. Knowing what the back and sides are going to do tells me where that shaping needs to happen.
What It Costs to Record Acoustic Guitar in Chicago
Most acoustic-driven songs take 4 to 8 hours to record at $50 an hour, with a 4-hour minimum. Mixing and mastering starts at $300 per song, so a finished acoustic song typically lands between $500 and $700. To price a single, an EP, or a full acoustic album in Chicago, plug your song count into the calculator below.
What Will Your Project Cost?
A tight, rehearsed session moves toward the faster end (2 hrs per instrument or vocalist). A session still working out parts moves toward 4 hrs or more per instrument/vocalist. Recording time is always dependent on your level of preparedness.
Based on $50/hr studio time and mixing/mastering starting at $300 per song. Give the studio a call for a tighter estimate.
Call for a Free ConsultationWhat to Tell Me About Your Guitar
When you call, give me the make and model of your guitar, and the back, side, and top woods if you know them. Tell me roughly how old it is, since rosewood and koa change as they age. If you’re bringing more than one guitar, give me the details on each. That way I know what I’m working with before you walk in.
Getting Started
Untold Stories Recordings is Chicago’s #1-rated and most-reviewed recording studio, with a 5.0 rating across 197+ reviews. Call the studio at 872-444-6316 to talk through your guitar and your project.